| Item No. | TL2040 |
| Alignment method | Precise core alignment and cladding alignment |
| Applicable fibers | Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651-653, ITU-TG.655 and ITU-TG.657. |
| Optical fiber diameter | Cladding; 80-150p m, coating layer: 0.1 —3mm |
| Cutting length | 5-16mm ( coated optical fiber diameter.– -C.250p m) ;10mm ( coated optical fiber diameter: 0.25- 3mm) |
| Fusion splicing consum ption (typical value) | 0.02dB (SMF) ; 0.01 dB ( MMF ) ; 0.04dB (DSF ) ; 0.04dB |
| Return loss | (NZDSF) Better than 60dB |
| Fusion splicing time (typical value) | 7s |
| Heating time (typical value) | 18s |
| Pulling force test | 1.96-2.25N |
| Thermal shrinkage tube | 60mm, 40mm and a series of thermal shrinkage tubes |
| Graphical display | High-performance 4.3 inch LCD |
| Magnification time | 320 times/88 times |
| Fusion splicing record | 10000 groups |
| Battery capacity Battery service life |
11.1V, 6400mAh, typical value of fusion splicing and thermal cycle is 220 times Cycle charging times reach 300-500, can be replaced by customers |
| Electrode service life | Typical value is 4000 times, can be replaced by customers |
| Construction lighting | Built-in lights with high-brightness and wide lighting area |
| Working environment | Temp:-10-50°C ; hum: 0-95%RH, height above sea level:0-6000m |
| Operation interfaces | GUI graphical operation interfaces |
| External power | AC: AC100-240V, 60Hz, 0-1.5A; DC: DC10-15V |
| External port | USB / SD |
| Dimensions Weight | 120mm ( W ) x 130mm ( H ) x 154mm (D) ( without rubber anti-vibration pad ) 1.59kg (host engine) , 0.37kg (battery) |
OPTICAL FUSION SPLICER
Precise fiber core alignment, ultra-low fiber fusion splicing consumption
7s fast fusion splicing, 18s highly efficient heating.
320 times image magnification, 5mm fusion splicing for fibers of ultra-short
cutting length 300 groups of fusion splicing modes, 100 groups of heating modes.
10000 groups of fusion records, 64 images storage.
Ceramic presser foot, ceramic V-block, all-in-one fixture.
Dual-direction splicing, automatic splicing, intelligent pyrocondensation.
USB and SD card interfaces, U-disk automatic software upgrade.
Built-in modular lithium battery, supports 220 times of splicing and heating cycles.
Related products
TELECOM TOOLS
TELECOM TOOLS
TELECOM TOOLS
TELECOM TOOLS
TELECOM TOOLS
TELECOM TOOLS
TELECOM TOOLS
TELECOM TOOLS